Introduction
This guide will show you how to attach the T-adapter to the telescope. The T-adapter will allow you to mount either the eyepiece or camera onto the telescope for observing.
-
-
Remove the cap on the back end of the telescope.
-
-
-
Remove the cap from the end of the T-adapter.
-
Place the cap someplace where you will not lose it.
-
-
-
Screw the T-adapter into the threads on the back end of the telescope.
-
This material is based upon work supported by the National Science Foundation under Grant No. 1212159. Any opinions, findings and conclusions or recommendations are those of the author(s) and do not necessarily reflect the views of the NSF.
This material is based upon work supported by the National Science Foundation under Grant No. 1212159. Any opinions, findings and conclusions or recommendations are those of the author(s) and do not necessarily reflect the views of the NSF.